top of page
Heresite_HereShield_Coating_AG Technical_All sizes-2.jpg

HERESITE PROTECTIVE COATING

HERESITE VR-514 air-dry phenolic coating is specially formulated to permit application by brush, spray, or roller.

Heresite HereShield is a low-VOC direct-to-metal coating that was developed as a higher-performing alternative to VR-514. It exhibits excellent corrosion resistance, UV resistance, and weathering qualities, along with good adhesion to ferrous and non-ferrous metals without complex pretreatment or primers. HereShield offers excellent durability and salt fog performance. Additional benefits include good adhesion, good film-building characteristics, and flexibility. This single-component coating is typically applied on the internal and external surfaces of HVAC-R heat exchangers and related equipment. HereShield is specially formulated for marine/saltwater environments. It is splash resistant to a range of acids and inorganic salts.

HVAC Coating Protection

Heresite Coatings extend the life of equipment multiple times, ensuring a significant economic benefit to the application of Heresite coatings to your coils, radiators or other process equipment. Plus, corrosion prevention has been shown to improve air quality and energy efficiency.

HVAC Coil Protection

The performance of an HVAC coil impacts the performance of the entire machine. Fortunately, environmental corrosion can be significantly reduced by applying protective HVAC coil coatings to the coils and components of your equipment.

HVAC Industrial Equipment Protection

Extreme Coastal Environment Protection

Protect your HVAC industrial equipment with Heresite Protective Coatings. We can coat heat exchangers, radiators, or industrial equipment components depending on your protective coating needs.

Due to its superior bond strength and ability to perform in temperature extremes, Heresite protective coatings are also used to prevent corrosion of inside and outside surfaces as well as equipment used in corrosive settings, such as food processing or agriculture. 

HVAC coils and equipment subject to ocean air or water must be protected in order to withstand the especially harsh corroding factors present in a marine or coastal environment. Due to the abundance of sodium chloride (salt), temperature fluctuations, and UV exposure, the potential for rapid and highly damaging corrosion on HVAC coils and units is inevitable without protective coatings formulated for harsh environments. The need for coastal environment protection occurs farther from the shoreline than you might imagine.

No matter the environment, Heresite has you covered.

If you are in the HVAC-R Industry you know that corrosion is one of the largest single expenses resulting in equipment failures and increased charges. Have you considered protecting equipment that services the following environments?

  • Wastewater treatment plants

  • Gas and oil refinery operations

  • Battery manufacturers

  • Sulfur water areas

  • Pulp and paper mills

  • Wineries

  • Chemical Plants

  • Saltwater coastal installations

  • Mining industry

  • Airports

  • Heat recovery

  • Work boats – barges

  • Yacht HVAC

 

Protect your investment by relying on Heresite Protective Coatings no matter the Environment.

  • Chemical plants

  • Semiconductor manufacturing

  • Pork processing

  • Bakeries

  • Offshore

  • Peanut roasting

  • Swimming pools

  • Lumber drying

  • Defense

  • Confectionary

  • Glass manufacturers

  • Agriculture

  • Pharmaceutical
     

bottom of page